Faucet Installation: What You Should Do
Go to: Previous Article Next Article
Faucet installation is not as hard as you think. In fact, many home improvement sites and resources simply recommend that you do it yourself. Do remember though that every DIY project requires some basic knowledge. You also need to have the ability to follow instruction to the letter. Here are some things you should know about installing faucets.
Bottom or Top
These days, faucet choices are more confusing than installation itself. There are just so many faucet designs and several types that you could easily get confused. Like many consumers, you could just be tempted to make a decision based on design alone. A design of your choice however may not specifically fit your needs or your sink. Check if the holes in your faucet correspond to your sink. Determine too if you prefer a top or a bottom mounted faucet.
Bottom Mounted Faucet
Bottom mounted types are held in position from under the sink. From there, you only have to manually thread the mounting nuts to the tailpiece and install the washers. Next, put the escutcheons in place with a little plumber's putty. You can then position the handles on top.
Top Mount
Many home owners prefer top mounted faucet installation. To make it even more less of a chore, you can get a top mounted faucet with a gasket of its own. A gasket will be all the security you will need to ensure that a faucet is tightly in place. An alternative to a gasket would be to use plumber's putty. After smearing the putty, you just have to put the faucet in after which you can go on with washer and mounting nut installation.
Supply Lines
Your faucet is now in place. All that is left to do is to connect the faucet to the water supply lines. Connect the appropriate hot and cold lines to the right shut off valves. You can use pipe tape to make sure that you have a tight connection. Check all the connections again before you give a go signal to turn on the water supply.
Remember that the real key to installing faucets is the instructions. Some faucet models may already include manual instructions for installation. If they do not, you can easily locate the instructions online. Do make sure though that the instructions you are following are perfectly matched to your type of faucet and connection.
Faucet Tips
There seems to be no big deal to installing your own faucet. Sometimes the real challenge is in going through the pre installation concerns. You have to consider for example your faucet design based on whether you will be placing it on your kitchen sink or in the bathroom. Some designs are simply meant for one or the other.
Another faucet related consideration would be the space. A small kitchen sink and a small bathroom would look better with small faucets. You could also opt for wall mounted faucets to maximize the use of your small space.
Handles are another factor to consider. Two handle faucets are popular because they make mixing water easier and more accurate. Single handle faucets however are quick and easy to use.
Faucet installation can be the easiest project you can do. Do make sure though that all your pre installation concerns have been properly addressed.
Article Source: Articlelogy.com
- Credit Cards A big selection of Cards in all flavors: Bad Credit Cards, Secured Cards, Prepaid Cards, Credit Cards for Canada, Low Interest Cards, etc -
Word Count: 579
Reduce Your Debts Without Bankruptcy. See How Much You Can Save. Free Debt Analysis
